{"title":"RockJock","description":"","products":[{"product_id":"rockjock-johnny-joint-rebuild-kit-2-5in-w-2-bushings-2-side-washers-1-snap-ring","title":"RockJock Johnny Joint Rebuild Kit 2.5in w\/ 2 Bushings 2 Side Washers 1 Snap Ring","description":"Rebuild kit for the 2 1\/2 in. RockJock(R) Johnny Joint(R) rod ends includes 2 urethane bushing halves, 2 side washers and 1 snap ring. The CE-9110T Johnny Joint(R) tool makes this rebuild job a lot easier!","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921952358711,"sku":"ROKCE-9110RK","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-johnny-joint-rebuild-kit-2-5in-w-bushings-side-washers-1-304.webp?v=1707590853"},{"product_id":"rockjock-johnny-joint-rebuild-kit-2in-w-2-bushings-2-side-washers-1-snap-ring","title":"RockJock Johnny Joint Rebuild Kit 2in w\/ 2 Bushings 2 Side Washers 1 Snap Ring","description":"Rebuild kit for the 2 in. RockJock(R) Johnny Joint(R) rod ends includes 2 urethane bushing halves, 2 side washers and 1 snap ring. The CE-9112T Johnny Joint(R) tool makes this rebuild job a lot easier!","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921954914615,"sku":"ROKCE-9112RK","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-johnny-joint-rebuild-kit-2in-w-2-bushings-side-washers-1-313.webp?v=1707590947"},{"product_id":"rockjock-johnny-joint-rod-end-2-1-2in-forged-2-625in-x-562in-ball-1-1-4in-12-rh-thread-shank","title":"RockJock Johnny Joint Rod End 2 1\/2in Forged 2.625in X .562in Ball 1 1\/4in-12 RH Thread Shank","description":"RockJocks forged Johnny Joints(R) for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1\/2 in. diameter, fitted with a zerk fitting for greasing, 2 1\/4 in. of 1 1\/4 in.-12 right hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921956946231,"sku":"ROKCE-9114","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-johnny-joint-rod-end-2-12in-forged-625in-x-562in-ball-1-14in-301.webp?v=1707591026"},{"product_id":"rockjock-tj-lj-xj-mj-johnny-joint-trac-bar-front-bolt-on-adjustable-greasable","title":"RockJock TJ\/LJ\/XJ\/MJ Johnny Joint Trac Bar Front Bolt-On Adjustable Greasable","description":"RockJocks Johnny Joint(R) adjustable front trac bar for the TJ\/XJ\/LJ\/MJ features an offset Johnny Joint(R) rod end that puts the bar further forward providing more clearance between the diff and the trac bar. Other features include 1 1\/4 in. x .250 wall 4130 chrome moly construction, a welded in gusset from the bar to the Johnny Joint(R), heavy duty adjustor end with with bushing and steel insert sleeve that bolt into the factory housing bracket, and semi-gloss black powder coat finish. Some drilling is required for installation. The supplied frame bolt is a 5\/8 in. and this hole must be drilled to size to accommodate the heavier duty bolt. NOTE: This trac bar is intended to be used with a minimum of 2 in. of lift. It may work on vehicles with less lift with Dana 30 frontends, however, on vehicles with no lift and a Dana 44, 9 in. or 60 frontend, you may run into a clearance issue. Always check fitment before drilling!","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921961468215,"sku":"ROKCE-9120TJS","price":466.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-tjljxjmj-johnny-joint-trac-bar-front-bolt-adjustable-712.webp?v=1707591228"},{"product_id":"rockjock-tj-lj-xj-mj-currectlync-steering-system-bolt-on-w-1-1-4in-dia-tie-rod-forged-drag-link","title":"RockJock TJ\/LJ\/XJ\/MJ Currectlync Steering System Bolt-On w\/ 1 1\/4in Dia. Tie Rod\/Forged Drag Link","description":"RockJocks Currectlync(R) heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 ¼' diameter forged alloy drag link, and 1 ¼' solid alloy steel tie rod bar that is bored and threaded on the ends. All 7\/8 in. thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components. NOTE: This unit is designed to be used on vehicles with 4 in. of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2 in. bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921962942775,"sku":"ROKCE-9701","price":712.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-tjljxjmj-currectlync-steering-system-bolt-w-1-14in-dia-tie-984.webp?v=1707591284"},{"product_id":"rockjock-tj-lj-xj-mj-currectlync-drag-link-end-lh-thread","title":"RockJock TJ\/LJ\/XJ\/MJ Currectlync Drag Link End LH Thread","description":"Left hand thread drag link end for RockJocks Currectlync(R) heavy duty steering kit for for Jeep TJ, LJ, XJ, MJ and ZJ vehicles is designed with 1 1\/8 in. thread for maximum strength. Grease fitting provides for increased performance and long life. Includes boot, castle nut, and cotter pin. This end fits at the pitman arm of the Currectlync(R) drag link only and may not be used in conjunction with any stock steering components.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921963368759,"sku":"ROKCE-9701DLR","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-tjljxjmj-currectlync-drag-link-end-lh-thread-steering-953.webp?v=1707591328"},{"product_id":"rockjock-tj-lj-xj-mj-currectlync-tie-rod-end-rh-thread-zerk-on-cap-for-use-w-ce-9701-kit","title":"RockJock TJ\/LJ\/XJ\/MJ Currectlync Tie Rod End RH Thread Zerk On Cap For Use w\/ CE-9701 Kit","description":"Right hand thread tie rod end for RockJocks Currectlync(R) heavy duty steering system is designed with 22mm x 1.5 pitch RH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot, castle nut, and cotter pin. If you are buying a replacement tie rod end for your Currectlync(R) steering - this is the tie rod end with the zerk fitting on the back of the cap that goes on the drivers side of the vehicle! For use as a replacement part for the RockJock Currectlync(R) system only and may not be used in conjunction with any stock steering components.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921964417335,"sku":"ROKCE-9701TRR","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-tjljxjmj-currectlync-tie-rod-end-rh-thread-zerk-cap-w-ce-553.webp?v=1707591347"},{"product_id":"rockjock-tj-lj-antirock-sway-bar-kit-front-bolt-on-forged-arms","title":"RockJock TJ\/LJ Antirock Sway Bar Kit Front Bolt-On Forged Arms","description":"RockJocks Antirock(R) front sway bar kit for 1997-2006 Jeep TJ Wranglers and LJ Unlimiteds provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock(R) off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, forged chromoly arms, bushings, hardware, and step-by-step instructions. Sway bar is positioned through the front cross member and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock(R) sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921967366455,"sku":"ROKCE-9900","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-tjlj-antirock-sway-bar-kit-front-bolt-forged-arms-bars-399.webp?v=1707591383"},{"product_id":"rockjock-jk-antirock-sway-bar-kit-front-bolt-on-steel-frame-brackets-forged-arms","title":"RockJock JK Antirock Sway Bar Kit Front Bolt-On Steel Frame Brackets Forged Arms","description":"RockJocks Antirock(R) front sway bar kit for 2007-2018 Jeep JK Wranglers provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock(R) off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, forged chomoly arms, bushings, hardware, and step-by-step instructions. The steel sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock(R) sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921968513335,"sku":"ROKCE-9900JKF","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jk-antirock-sway-bar-kit-front-bolt-steel-frame-brackets-686.webp?v=1707591418"},{"product_id":"rockjock-jk-4d-antirock-sway-bar-kit-rear-bolt-on-forged-arms","title":"RockJock JK 4D Antirock Sway Bar Kit Rear Bolt-On Forged Arms","description":"RockJocks Antirock(R) rear sway bar kit for all 4 door models of the 2007-2018 Jeep JK Wranglers, when used in conjunction with a front Antirock(R) sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock(R) off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron bushings, forged chomoly arms, adjustable length heim jointed sway bar links, long travel stainless braided brake lines that relocate the brake line inboard of the frame for sway bar arm clearance, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicles axle housing. The RockJock Antirock(R) sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock setup.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921968677175,"sku":"ROKCE-9900JKR4","price":855.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jk-4d-antirock-sway-bar-kit-rear-bolt-forged-arms-bars-185.webp?v=1707591435"},{"product_id":"rockjock-jl-jt-antirock-sway-bar-kit-front-bolt-on-forged-arms","title":"RockJock JL\/JT Antirock Sway Bar Kit Front Bolt-On Forged Arms","description":"RockJocks Antirock(R) front sway bar kit for 2018 and Up Jeep JL Wranglers and JT Gladiators provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock(R) off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, forged chomoly arms, bushings, hardware, and step-by-step instructions. The billet aluminum sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock(R) sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921968808247,"sku":"ROKCE-9900JLF","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jljt-antirock-sway-bar-kit-front-bolt-forged-arms-bars-327.webp?v=1707591451"},{"product_id":"rockjock-jl-2d-or-4d-antirock-sway-bar-kit-rear-bolt-on-forged-arms","title":"RockJock JL 2D or 4D Antirock Sway Bar Kit Rear Bolt-On Forged Arms","description":"RockJocks Antirock(R) rear sway bar kit for 2018 and Up Jeep JL Wranglers, when used in conjunction with a front Antirock(R) sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock(R) off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron frame bushings, forged chomoly arms, adjustable length heim jointed sway bar links, long travel stainless braided brake lines that relocate the brake line inboard of the frame for sway bar arm clearance, necessary hardware, and step-by-step instructions. Unit mounts into frame crossmember in front of the axle and attaches to the stock mounts on the vehicles axle housing. The RockJock Antirock(R) sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock setup.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921968906551,"sku":"ROKCE-9900JLR4","price":755.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jl-2d-4d-antirock-sway-bar-kit-rear-bolt-forged-arms-bars-172.webp?v=1707591459"},{"product_id":"rockjock-xj-antirock-sway-bar-kit-front-bolt-on-aluminum-mounts-17in-forged-arms","title":"RockJock XJ Antirock Sway Bar Kit Front Bolt-On Aluminum Mounts 17in Forged Arms","description":"RockJocks Antirock(R) front sway bar kit for 1987-2001 Jeep XJ Cherokees and 1986-1992 Jeep MJ Comanches provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock(R) off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, forged chomoly arms, billet aluminum sway bar mounting brackets, bushings, hardware, and step-by-step instructions. The billet aluminum sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock(R) sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921969660215,"sku":"ROKCE-9900XJF","price":795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-xj-antirock-sway-bar-kit-front-bolt-aluminum-mounts-17in-156.webp?v=1707591482"},{"product_id":"rockjock-jk-currectlync-steering-system-w-hardware-mounting-kit","title":"RockJock JK Currectlync Steering System w\/ Hardware Mounting Kit","description":"RockJocks Currectlync(R) steering system for 2007-2018 Jeep JK Wranglers features an alloy steel 1 1\/2 in. diameter tie rod, 1.3 in. diameter solid forged steel drag link, larger forged, greasable tie rod ends and premium jam nuts \u0026amp; adjuster. This kit is completely bolt-on and includes a heavy duty steering stabilizer shock mounting kit. Tie rod and drag link both feature a double adjusters so that none of the steering components have to be removed from the vehicle for adjustment. This unit will work on stock height or lifted vehicles and is compatible with ram assist steering. This system is completely bolt-on and no modifications or machining to any part of the vehicle are necessary.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921973231927,"sku":"ROKJK-9704","price":785.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jk-currectlync-steering-system-w-hardware-mounting-kit-244.webp?v=1707591613"},{"product_id":"rockjock-jk-currectlync-steering-sys-w-flipped-drag-link-1-65in-dia-tie-rod-1-3in-dia-w-hardware","title":"RockJock JK Currectlync Steering Sys. w\/Flipped Drag Link 1.65in Dia. Tie Rod 1.3in Dia. w\/Hardware","description":"RockJocks Currectlync(R) steering system with flipped drag link for 2007-2018 Jeep JK Wranglers features an alloy steel 1 1\/2 in. diameter tie rod, 1.3 in. diameter solid forged steel drag link, larger forged, greasable tie rod ends and premium jam nuts \u0026amp; adjuster. This kit is completely bolt-on, with the exception of drilling the passengers side steering arm and installing the supplied tapered bushing to accomodate the drag link flip. Kit also includes a heavy duty steering stabilizer shock mounting kit. Tie rod and drag link both feature a double adjusters so that none of the steering components have to be removed from the vehicle for adjustment. This unit will work on stock height or lifted vehicles and is compatible with ram assist steering.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921973920055,"sku":"ROKJK-9704P","price":761.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jk-currectlync-steering-sys-wflipped-drag-link-1-65in-dia-967.webp?v=1707591639"},{"product_id":"rockjock-2021-bronco-geometry-correction-axle-bracket-for-rear-trac-bar","title":"RockJock 2021+ Bronco Geometry Correction Axle Bracket for Rear Trac Bar","description":"RockJock's Geometry Correction Axle Bracket Kit for the rear Trac Bar of 2021-up Broncos is a highly recommended upgrade for lifted vehicles to relocate the axle housing mounting point of the rear trac bar upward, correcting the location of the trac bar mounting point. You'll find this bracket necessary on lifted vehicles that feature heavy additions above the roof or behind the tailgate. The addition of this bracket will restore rear suspension lateral geometry and produce better overall vehicle handling by raising the rear suspension roll center to bring it closer to the vehicle's center of gravity. This kit is completely bolt-on, works with factory or aftermarket trac bars, such as our RJ-183400-101 Johnny Joint adjustable trac bar) and very simply installs onto the factory axle housing. A rear brake line relocation tab is included to provide clearance for the new trac bar bolt location. Bracket is finished in semi-gloss black and includes all necessary hardware for installation.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921975623991,"sku":"ROKRJ-181400-101","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-2021-bronco-geometry-correction-axle-bracket-rear-trac-bar-595.webp?v=1707591741"},{"product_id":"rockjock-jl-jt-antirock-sway-bar-kit-front-forged-arms-steel-brackets-850in-bar","title":"RockJock JL\/JT Antirock Sway Bar Kit Front Forged Arms Steel Brackets .850in Bar","description":"RockJock's Antirock front sway bar kit for the front of all Jeep JT Gladiator models, and heavy JLs provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, forged chromoly arms, bushings, hardware, and step-by-step instructions. The fabricated steel sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar. This kit is based off of a JT with aftermarket bumpers 37 in. tires, 37 in. spare and no other additional weight added, overlanding equipment, etc..","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921977295159,"sku":"ROKRJ-246100-101","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jljt-antirock-sway-bar-kit-front-forged-arms-steel-brackets-807.webp?v=1707591804"},{"product_id":"rockjock-jl-jt-johnny-joint-kit-front-end-housing-all-factory-axle-housings","title":"RockJock JL\/JT Johnny Joint Kit Front End Housing All Factory Axle Housings","description":"Replace the front differential housing upper control arm bushings on your 2018 and up Jeep JL Wrangler or JT Gladiator vehicle with Johnny Joint(R) rod ends from RockJock to get maximum articulation out of your suspension! This kit includes a Johnny Joint(R) inserts that replace the rubber bushings on the axle housing, greasable bolts, installation tool and complete instructions.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921977786679,"sku":"ROKRJ-301000-103","price":234.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jljt-johnny-joint-kit-front-end-housing-all-factory-axle-860.webp?v=1707591830"},{"product_id":"rockjock-jl-jt-currectlync-steering-system-forged-drag-link-42mm-tie-rod-tube-w-stabilizer-brackets","title":"RockJock JL\/JT Currectlync Steering System Forged Drag Link 42mm Tie Rod Tube w\/Stabilizer Brackets","description":"RockJock's Currectlync(R) Steering System for 2018 and up Jeep JL Wranglers and 2020 and up Jeep JT Gladiators is must-have for those who actually get their Jeeps out in the dirt! Don't get stranded in the wilderness with bent or broken steering components! RockJock's completely bolt-on Currectlync Steering System features an alloy steel 1 5\/8 in. diameter tie rod, 1.3 in. diameter solid forged steel drag link, larger forged, greasable tie rod ends and premium jam nuts \u0026amp; adjusters. Kit includes RockJock's JL\/JT High-Mount Steering Stabilizer Relocation Bracket Kit for the passenger's side of the stabilizer shock which moves the shock from the tie rod to the axle housing, as well as way up out of harm's way. A heavy duty stabilizer shock mounting kit for the opposite end of the shock is also included that moves that shock mounting location from the axle housing to the tie rod tube. Both the tie rod and drag link feature double adjusters so that they do not require removal from the vehicle for adjustment once installed. This unit is designed for use on stock height or lifted vehicles, but for those with big tires, these components are also compatible with ram assist steering (see part number JK-9703RM for an easy to install ram mount). This easy to install kit requires no modifications or machining to any part of the vehicle and an instruction manual and video are both available to assist!","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921977884983,"sku":"ROKRJ-442100-101","price":854.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jljt-currectlync-steering-system-forged-drag-link-42mm-tie-208.webp?v=1707591837"},{"product_id":"rockjock-jl-jt-johnny-joint-front-trac-bar-forged-organically-shaped-adjustable-greasable","title":"RockJock JL\/JT Johnny Joint Front Trac Bar Forged Organically Shaped Adjustable Greasable","description":"RockJocks Johnny Joint(R) adjustable front trac bar for 2018 and up Jeep JL Wrangler and JT Gladiator vehicles features precise bends for a perfect fit! This bar can be used on a stock JL\/JT, on a JL\/JT with our Off Road Suspension System, or anything in between! Bar is fabricated from 1.250 in. o.d. x .250 in. wall 4130 chromoly steel tubing, and features greasable high performance narrow Johnny Joint(R) rod ends on both ends. The thread on the adjustable rod end is 1 in. RH thread and includes a jam nut. Rubber limiting washers are included for the frame end of the bar to assist in keeping the arm vertical without compromising articulation. Arm is finished in semi-gloss black powder coat and the forged Johnny Joint(R) end is finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":47921978573111,"sku":"ROKRJ-9120FJLF","price":374.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-jljt-johnny-joint-front-trac-bar-forged-organically-shaped-247.webp?v=1707591870"},{"product_id":"rockjock-tj-lj-xj-mj-currectlync-tie-rod-end-lh-thread-zerk-on-side-for-use-w-ce-9701-kit","title":"RockJock TJ\/LJ\/XJ\/MJ Currectlync Tie Rod End LH Thread Zerk On Side For Use w\/ CE-9701 Kit","description":"Left hand thread tie rod end for RockJocks Currectlync(R) heavy duty steering system is designed with 22mm x 1.5 pitch LH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot, castle nut, and cotter pin. If you are buying a replacement tie rod end for your Currectlync(R) steering - this is the tie rod end with the zerk on the side of the head that goes on the passenger side of the vehicle! For use as a replacement part for the RockJock Currectlync(R) system only and may not be used in conjunction with any stock steering components.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":48118322037047,"sku":"ROKCE-9701TRL","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/products\/ceec411f39e8e5176e500e889d0d7c81.jpg?v=1708054124"},{"product_id":"rockjock-jl-jt-currectlync-high-steer-steering-knuckles-2-3-4in-tie-rod-lift-2-1-2in-drag-link-lift","title":"RockJock JL\/JT Currectlync High Steer Steering Knuckles 2 3\/4in Tie Rod Lift 2 1\/2in Drag Link Lift","description":"RockJock's heavy duty High Steer Knuckles replace the aluminum factory knuckles and raise your tie rod 2 3\/4 in. and your drag link 2 1\/2 in.. Currectlync steering that is included in this kit features forged, organically shaped drag link for maximum up travel and a 42mm tie rod. All steering rod ends are forged steel. Additionally, kit includes fully integrated trac bar relocation and ram assist mounting bracket that raises your trac bar 2 in. and corrects it's geometry as well as giving you a solid mounting point for your hydraulic steering assist ram. The bottom of the bracket is a skid plate protects the ram from rocks. RockJock's forged chromoly tie rod clamp installs to provide and easy hook-up point for the other end of your ram.  All other factory outer components retained with the new knuckles including outer axles, unit bearings, dust shields and brakes.The use of RockJock's CE-9120FJL forged, organically shaped front trac bar is also strongly encouraged, so that all components nest together for maximum up travel as engineered.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":48118322299191,"sku":"ROKRJ-447100-101","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/products\/07da0a972d871e87a61d1445327c3929.jpg?v=1708054146"},{"product_id":"rockjock-antirock-sway-bar-arm-hardware-kit","title":"RockJock Antirock Sway Bar Arm Hardware Kit","description":"RockJock(R) offers an upgraded hardware kit for Antirock(R) sway bar kits that may be added to any vehicle equipped with an Antirock(R) as an upgrade. Kit includes 2 clear anodized, tapered aluminum washers and flat head allen bolts for arm retention and a new set of 3\/8 in.-24 arm p in. bolts and nylock nuts.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":48216934187319,"sku":"ROKCE-99005A","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-antirock-sway-bar-arm-hardware-kit-100.jpg?v=1712167501"},{"product_id":"rockjock-tj-lj-antirock-sway-bar-kit-rear-bolt-on-mounts-weld-on-axle-tab-forged-arms","title":"RockJock TJ\/LJ Antirock Sway Bar Kit Rear Bolt-On Mounts: Weld-On Axle Tab Forged Arms","description":"RockJocks Antirock(R) rear sway bar kit for 1997-2006 Jeep TJ Wranglers and LJ Unlimiteds is completely bolt on and includes all necessary hardware, with the exception of the housing tabs which require welding to affix them to the differential housing. Kit includes the 45 in. sway bar, forged chomoly sway bar arms, semi-gloss black powder coated bolt on frame brackets, sway bar bushings, adjustable heim jointed sway bar links, weld on housing tabs, and all necessary hardware. Detailed instructions included. Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":48314654294327,"sku":"ROKCE-9900TJR","price":785.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/rockjock-tj-lj-antirock-sway-bar-kit-rear-bolt-on-mounts-weld-824.jpg?v=1712183357"},{"product_id":"rockjock-jl-jt-xj-mj-front-jk-front-and-rear-tj-lj-antirock-sway-bar-bushing-for-25-spline-bar","title":"RockJock JL\/JT\/XJ\/MJ Front JK Front and Rear TJ\/LJ Antirock Sway Bar Bushing for 25 spline bar","description":"RockJock's black UHMW bushing for all JK, TJ rear, XJ front and all universal Antirock sway bar kits. This is the bushing that supports the Antirock torsion bar into bolt- on frame brackets, or the tube that is included n the universal kits.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":48819560186167,"sku":"ROKCE-9901D","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/734b4dc800728d8fecf026aef1b5986c.jpg?v=1714192509"},{"product_id":"rockjock-2021-bronco-johnny-joint-rear-lower-control-arm-set-steel-adjustable","title":"RockJock 2021+ Bronco Johnny Joint Rear Lower Control Arm Set Steel Adjustable","description":"RockJock's rear lower control arms for 2021-up Broncos provide length adjustability via RH\/LH threaded adjuster ends, allowing pinion angle to be adjusted after the installation of a suspension lift without either end of the arm having to be removed from the vehicle! Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. Arms are fabricated from 1.625 in. o.d. x .250 in. wall DOM steel tubing. For maximum articulation, arms feature forged 2 1\/2 in. Johnny Joint rod ends on both ends with 1 1\/4 in.-14 RH\/LH threads and jam nuts. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":49183600738615,"sku":"ROKRJ-182600-101","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/7020630ce10dd7449ee59dd8eccddbdd.jpg?v=1718177921"},{"product_id":"rockjock-2021-bronco-johnny-joint-rear-trac-bar-adjustable-greasable","title":"RockJock 2021+ Bronco Johnny Joint Rear Trac Bar Adjustable Greasable","description":"RockJock's Johnny Joint adjustable rear trac bar for 2021-up Bronco features precise bends for a perfect fit into stock or lifted vehicles as well as vehicles with larger, aftermarket differentials. For maximum articulation, this trac bar features greasable, narrow Johnny Joint rod ends at both ends, the axle housing end being adjustable. Use the adjustability of this bar to center the axle under the chassis as well as to improve driveshaft-to-fuel-tank clearance. This bar may be used with our without our RJ-181400-101 Trac Bar Relocation Bracket. Bar is fabricated from 1 3\/8 in. x .120 in. wall DOM tubing and is finished insemi-gloss black powder coat on the bar and gold zinc plating on the Johnny Joint adjuster end.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":49424885023031,"sku":"ROKRJ-183400-101","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/93cdcb9371ae930b81edd36d22b67c30.jpg?v=1722142015"},{"product_id":"rockjock-adjustable-sway-bar-end-link-rod-6-1-2in-long-x-1-2in-dia-x-1-2in-20-rh-lh-threads","title":"RockJock Adjustable Sway Bar End Link Rod 6 1\/2in Long x 1\/2in Dia. x 1\/2in-20 RH\/LH Threads","description":"RockJock's Sway Bar End Link Stud is 6 1\/2 in. long and features 2 in. of 1\/2 in.-20 LH thread and 2 in. of 1\/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut it shorter as deemed necessary by your application. This rod is included in some Antirock Sway Bar Kits, but is able to be purchased individually as a replacement for a bent rod, or universal usages you may find for it. Additionally, if you have changed the lift amount on your vehicle you may need a different length of end link rod to accommodate your new lift. You can simply buy new link rods to accommodate your needs and install them without having to replace all of your existing hardware.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50208721502519,"sku":"ROKCE-9901RD3","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/aacd832ee49ab91f08f18b167132d407.jpg?v=1737862127"},{"product_id":"rockjock-2021-ford-bronco-w-non-electric-factory-front-sway-bar-antirock-front-sway-bar-kit","title":"RockJock 2021+ Ford Bronco (w\/ Non-Electric Factory Front Sway Bar) Antirock Front Sway Bar Kit","description":"RockJock's Antirock front sway bar kit for 2021-up Broncos (with non-electric factory front sway bars) provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, fabricated steel arms, fabricaed steel frame brackets, sway bar bushings, hardware, and step-by-step instructions. Sway bar bolts directly onto the bottom of the chassis and directly replaces the factory unit. Sway bar links attach to the lower control arms using billet steel mounts provided in the kit. The RockJock Antirock sway bar does not need to be disconnected for off-road use. NOTE: ONLY USE THIS KIT on vehicles that are NOT equipped with a factory electronic disconnect sway bar! This kit is ONLY for use on vehicles with a standard, base sway bar. CAUTION: Vehicles will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50312768291127,"sku":"ROKRJ-286100-101","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/6e83894d5613eea46a1cd95319b36691.jpg?v=1740412316"},{"product_id":"rockjock-johnny-joint-rebuild-kit-narrow-2in-w-1-bushing-2-side-washers-1-snap-ring","title":"RockJock Johnny Joint Rebuild Kit Narrow 2in w\/ 1 Bushing 2 Side Washers 1 Snap Ring","description":"RockJocks rebuild kit for the 2 in. narrow style Johnny Joint rod ends includes 1 urethane bushing, 2 side washers and 1 snap ring. The CE-9112T Johnny Joint tool makes this rebuild job a lot easier!","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50613995602231,"sku":"ROKCE-9112NRK","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/b35e60456c5cce46816c4cdac7d1de5a.jpg?v=1747201723"},{"product_id":"rockjock-jk-antirock-sway-bar-kit-front-forged-arms-forged-brackets-heavy-1in-bar","title":"RockJock JK Antirock Sway Bar Kit Front Forged Arms Forged Brackets Heavy 1in Bar","description":"Overlanders and Racers! RockJock heard you and the wait is over! Their heavy bar Antirock Sway Bar Kit for the front of all Jeep JK Wrangler models features a 1 in. diameter bar! This heavier bar considerably increases the rate of the front sway bar for those with racks, roof top tents, camping gear, etc. This heavy bar kit is also applicable to desert racing applications. This kit easily bolts on with hand tools and is designed to directly replace the vehicle's stock front sway bar. The bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars. The Antirock front sway bar, when used in conjunction with a rear Antirock sway bar, provides a more stable feeling cabin and balanced performance of front and rear suspension in rugged off-road conditions. Antirocks gives the driver increased traction by balancing and distributing the weight and traction over all four tires.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50613995831607,"sku":"ROKRJ-236100-101","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/7a2bf2ed531ba2f12569394d6a482f0e.jpg?v=1747201726"},{"product_id":"rockjock-jl-jt-antirock-sway-bar-kit-front-billet-aluminum-arms-850in-bar","title":"RockJock JL\/JT Antirock Sway Bar Kit Front Billet Aluminum Arms - .850in Bar","description":"RockJocks Antirock front sway bar kit for the front of all Jeep JT Gladiator models, and heavy JLs) provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, beautiful, fully CNC machined 7075 billet aluminum arms, bushings, hardware, and step-by-step instructions. The billet aluminum sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar. This kit is based off of a JT with aftermarket bumpers 37 in. tires, 37 in. spare and no other additional weight added, overlanding equipment, etc.).","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50613995897143,"sku":"ROKRJ-246101-103","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/2046b9b4f878a6869647e9f0c6834bf4.jpg?v=1747201726"},{"product_id":"rockjock-antirock-sway-bar-kit-universal-40in-x-1in-bar-17in-steel-arms","title":"RockJock Antirock Sway Bar Kit Universal 40in x 1in Bar 17in Steel Arms","description":"RockJocks Antirock sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 39 1\/2 in. torsion bar length and 17 in. long fabricated steel arms. Vertical links use a 14 in. long 1\/2 in. x .20 RH\/LH threaded rod that can be cut down to your desired length, and the necessary 1\/2 in. x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 in. x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 39 1\/2 in. bar is a 1 in. diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50626605580599,"sku":"ROKCE-9907-17","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/ab3f6e3465f64b7db6e0241a84bcf0bc.jpg?v=1747464164"},{"product_id":"rockjock-jl-jt-winch-plate-kit-steel-bumper","title":"RockJock JL\/JT Winch Plate Kit Steel Bumper","description":"RockJocks Winch Plate Kit for all factory steel bumper equipped JL Wrangler, JL Unlimited and JT Gladiator models provides a clean solution for mounting your winch, and is also compatible with our CE-9033JLS Tow Kit! Compatible with common winches and fairleads, this plate mounts the winch low and tight to keep the vehicle's radiator airway free of obstruction. This easy to install, completely bolt on kit has you do some minor disassembly of the vehicle, by removing the front bumper. You then install this plate into the frame rails, insert your winch, reinstall the bumper and finish all the details! See the component's photo gallery as well as it's instruction manual for more details! NOTE: this plate does NOT work with factory installed winches on 2024 year model vehicles!","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50626605646135,"sku":"ROKRJ-641100-101","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/d0166d3041ed61dbe942bf1e5a14f2f6.jpg?v=1747464165"},{"product_id":"rockjock-jl-jt-currectlync-drag-link-organically-shaped-forged-chromoly","title":"RockJock JL\/JT Currectlync Drag Link Organically Shaped Forged Chromoly","description":"RockJocks completely bolt-on Currectlync Drag Link for JL Wrangler, JL Unlimited and JT Gladiator vehicles is an organically shaped chromoly forging with a deep dip in the middle of the bar that allows for maximum up travel, while still retaining maximum strength and rigidity. Additional features include larger, forged, greasable rod ends, premium adjuster and clamps and its painted black, so its ready for install right out of the box! The double adjuster feature allows for drag link spec. adjustments after installation without having to remove either end of the drag link from the vehicle. This easy to install component is designed for use on stock height or lifted vehicles, up to 6 in. lift) and requires no modifications or machining to any part of the vehicle.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50763413324087,"sku":"ROKRJ-442103-101","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/00aca635c8e41ca2169185bb389a46c5.jpg?v=1751087988"},{"product_id":"rockjock-jt-antirock-sway-bar-kit-rear-forged-arms","title":"RockJock JT Antirock Sway Bar Kit Rear Forged Arms","description":"The RockJock Antirock rear sway bar kit for JT Gladiators, when used in conjunction with a front Antirock sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron frame bushings, semi-gloss black powder coated forged 4140 chromoly arms, adjustable length heim jointed sway bar links, necessary hardware and step-by-step instructions. Unit mounts into a holes in the frame behind the axle and attaches to the vehicles stock axle housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock setup.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50805728248119,"sku":"ROKRJ-256200-101","price":1595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/0aaab523b4bb0a110cf9f91792629f10_bd2d13f1-5a83-452b-8b8b-88930e7e3b65.jpg?v=1751967955"},{"product_id":"rockjock-johnny-joint-rod-end-2-1-2in-forged-2-625in-x-562in-ball-1-1-4in-12-lh-thread-shank-1","title":"RockJock Johnny Joint Rod End 2 1\/2in Forged 2.625in X .562in Ball 1 1\/4in-12 LH Thread Shank","description":"RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1\/2 in. diameter, fitted with a zerk fitting for greasing, 2 1\/4 in. of 1 1\/4 in.-12 left hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50849856258359,"sku":"ROKCE-9114NL","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/920ded7ba0b874cc60150f999821c0aa_3b777a8b-a7c2-4bbf-a369-7e9aefb388c9.jpg?v=1752848821"},{"product_id":"rockjock-antirock-sway-bar-kit-universal-45in-bar-17in-steel-arms","title":"RockJock Antirock Sway Bar Kit Universal 45in Bar 17in Steel Arms","description":"RockJocks Antirock sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 45 in. torsion bar length and 17 in. long fabricated steel arms. Vertical links use a 14 in. long 1\/2 in. x .20 RH\/LH threaded rod that can be cut down to your desired length, and the necessary 1\/2 in. x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 in. x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 45 in. bar is a .800 in. diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50849856323895,"sku":"ROKCE-9902-17","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/ab3f6e3465f64b7db6e0241a84bcf0bc_bb343eee-a541-43f2-b325-240bb4a87cd2.jpg?v=1752848822"},{"product_id":"rockjock-jk-currectlync-drag-link-organically-shaped-forged-steel","title":"RockJock JK Currectlync Drag Link Organically Shaped Forged Steel","description":"RockJocks completely bolt-on Currectlync Drag Link for JK Wrangler and JK Wrangler Unlimited vehicles is an organically shaped chromoly forging with a deep dip in the middle of the bar that allows for maximum up travel, while still retaining maximum strength and rigidity. Additional features include larger, forged, greasable rod ends, premium adjuster and clamps, and its painted black so its ready for install right out of the box!","brand":"RockJock","offers":[{"title":"Default Title","offer_id":50849856389431,"sku":"ROKJK-9704DL-T","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/4120321dd8a1f1e53ca63e79d56a164a.jpg?v=1752848822"},{"product_id":"rockjock-jl-jt-antirock-sway-bar-kit-front-forged-arms-steel-brackets-heavy-1in-bar","title":"RockJock JL\/JT Antirock Sway Bar Kit Front Forged Arms Steel Brackets Heavy 1in Bar","description":"Overlanders and Racers! RockJock heard you and the wait is over! Their heavy bar Antirock Sway Bar Kit for the front of all Jeep JL Wrangler and JT Gladiator models features a 1 in. diameter bar! This heavier bar considerably increases the rate of the front sway bar for those with racks, roof top tents, camping gear, etc. This heavy bar kit is also applicable to desert racing applications. This kit easily bolts on with hand tools and is designed to directly replace the vehicle's stock front sway bar. The bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars. The Antirock front sway bar, when used in conjunction with a rear Antirock sway bar, provides a more stable feeling cabin and balanced performance of front and rear suspension in rugged off-road conditions. Antirocks gives the driver increased traction by balancing and distributing the weight and traction over all four tires. This kit includes all components for installation including, the sway bar, forged chromoly arms, bushings, hardware, and step-by-step instructions. The fabricated steel sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar. This kit is based off of a JT with aftermarket bumpers 37 in. tires, 37 in. spare and no other additional weight added, overlanding equipment, etc.).","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51254811656503,"sku":"ROKRJ-246100-103","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/e6964fa5698a015ac5279fe5fe97c4f9.jpg?v=1761306723"},{"product_id":"rockjock-johnny-joint-rod-end-2-1-2in-forged-2-365in-x-562in-ball-1in-14-rh-thread-ext-greased","title":"RockJock Johnny Joint Rod End 2 1\/2in Forged 2.365in X .562in Ball 1in-14 RH Thread Ext. Greased","description":"RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1\/2 in. diameter, fitted with a zerk fitting for greasing, 2 1\/4 in. of 1 in.-14 right hand threads on the shank, and a 2.365 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51740404121911,"sku":"ROKCE-9113N-14","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/decc40addc6f179796620baa29e6ef0d_bfccbfab-8382-4a1d-b5af-1eacce38ae15.jpg?v=1772526943"},{"product_id":"rockjock-johnny-joint-2-1-2in-forged-2-365in-x-562in-offset-ball-1-1-4in-12-rh-thread-shank","title":"RockJock Johnny Joint 2 1\/2in Forged 2.365in X .562in Offset Ball 1 1\/4in-12 RH Thread Shank","description":"RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1\/2 in. diameter, fitted with a zerk fitting for greasing, 2 1\/4 in. of 1 1\/4 in.-12 right hand threads on the shank, and a 2.365 in. mounting width offset ball with a .562 in. thru bolt hole. Finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51740404154679,"sku":"ROKCE-9114N-14","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/920ded7ba0b874cc60150f999821c0aa_2ad01fda-de5c-48bc-9dc7-c38ee4396aef.jpg?v=1772526943"},{"product_id":"rockjock-tj-lj-antirock-sway-bar-kit-front-bolt-on-aluminum-arms","title":"RockJock TJ\/LJ Antirock Sway Bar Kit Front Bolt-On Aluminum Arms","description":"RockJocks Antirock front sway bar kit for TJ Wranglers and LJ Unlimiteds provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, billet aluminum arms, bushings, hardware, and step-by-step instructions. Sway bar is positioned through the front cross member and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51800730927415,"sku":"ROKCE-9900A","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/4026c5a84d36f78c48c3d7571961e28a.jpg?v=1773923629"},{"product_id":"rockjock-2021-bronco-johnny-joint-rear-upper-control-arm-set-steel-adjustable","title":"RockJock 2021+ Bronco Johnny Joint Rear Upper Control Arm Set Steel Adjustable","description":"RockJocks rear upper control arms for 2021-up Broncos provide length adjustability via RH\/LH threaded adjuster ends, allowing pinion angle to be adjusted after the installation of a suspension lift without either end of the arm having to be removed from the vehicle! Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. Arms are fabricated from 1.625 in. o.d. x .250 in. wall DOM steel tubing. For maximum articulation, arms feature forged 2 1\/2 in. Johnny Joint rod ends on both ends with 1 1\/4 in.-14 RH\/LH threads and jam nuts. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51800730992951,"sku":"ROKRJ-182500-101","price":515.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/f86a1364762f295f0addcba9adabdc2c.jpg?v=1773923629"},{"product_id":"rockjock-jl-jt-currectlync-tie-rod-1-65in-dia-tube-w-hardware","title":"RockJock JL\/JT Currectlync Tie Rod 1.65in Dia. Tube w\/ Hardware","description":"RockJocks completely bolt-on Currectlync Tie Rod for JL Wrangler, JL Unlimited and JT Gladiator vehicles features 42mm, 1.65 in.) diameter alloy steel construction, larger, forged, greasable tie rod ends, premium jam nuts and adjuster and its painted black, so its ready for install right out of the box! Being that this heavy duty tie rod eliminates the factory steering stabilizer shock mounting location, RockJock offers various steering stabilizer shock relocation and high-mount kits for your stabilizer shock. The double adjuster feature allows for tie rod spec. adjustments after installation without having to remove either end of the tie rod from the vehicle. This easy to install component is designed for use on stock height or lifted vehicles, up to 6 in. lift) and requires no modifications or machining to any part of the vehicle.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51800731025719,"sku":"ROKRJ-442101-101","price":445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/80def1d1f125a28f2f8ff55db7a9a2b5.jpg?v=1773923630"},{"product_id":"rockjock-johnny-joint-rod-end-2-1-2in-weld-on-2-625in-x-640in-ball-ext-greased","title":"RockJock Johnny Joint Rod End 2 1\/2in Weld-On 2.625in X .640in Ball Ext. Greased","description":"RockJocks weld-on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1\/2 in. o.d. and features a 2.625 in. mounting width and a .640 in. thru bolt hole.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51813949276471,"sku":"ROKCE-9110P-28","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/96acd4b991398e7422b2a0cd1e9e422a.jpg?v=1774360507"},{"product_id":"rockjock-johnny-joint-rod-end-2in-narrow-forged-1-800in-x-625in-ball-3-4in-16-rh-thread-shank","title":"RockJock Johnny Joint Rod End 2in Narrow Forged 1.800in X .625in Ball 3\/4in-16 RH Thread Shank","description":"RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1\/4 in. of 3\/4 in.-16 right hand threads on the shank, and a 1.800 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51813949505847,"sku":"ROKCE-9112N75-16","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/dc97307fd3b8d00da10bc86374012230_fb27c9f4-14e2-4bb3-bf50-2fc4d831a3fa.jpg?v=1774360509"},{"product_id":"rockjock-johnny-joint-rod-end-2-1-2in-forged-2-812in-x-750in-ball-1-1-4in-12-rh-thread-shank","title":"RockJock Johnny Joint Rod End 2 1\/2in Forged 2.812in X .750in Ball 1 1\/4in-12 RH Thread Shank","description":"RockJocks forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1\/2 in. diameter, fitted with a zerk fitting for greasing, 2 1\/4 in. of 1 1\/4 in.-12 right hand threads on the shank, and a 2.812 in. mounting width ball with a .750 in. thru bolt hole. Finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":51813949538615,"sku":"ROKCE-9114-22","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/0b57d487e29ca8d63d8ce3dbd0067159_425bf9c0-515e-4de3-9c34-3ec2f192402a.jpg?v=1774360511"},{"product_id":"rockjock-jeep-jl-wrangler-unlimited-4door-bolt-on-antirock-rear-sway-bar-kit-forged-arms-1in-bar","title":"RockJock Jeep JL Wrangler Unlimited 4Door Bolt-On Antirock Rear Sway Bar Kit (Forged Arms - 1in Bar)","description":"RockJocks Antirock rear sway bar kit for JL Wranglers and Unlimiteds, when used in conjunction with a front Antirock sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. The included 50 in. x 1 in. bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron frame bushings, forged 4140 chomoly arms, adjustable length heim jointed sway bar links, necessary hardware, and step-by-step instructions. Unit mounts into frame crossmember in front of the axle and attaches to the stock mounts on the vehicles axle housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock setup.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":52000190529847,"sku":"ROKRJ-246203-101","price":755.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/219743e33595bb395f24e1de14236577L.jpg?v=1776476707"},{"product_id":"rockjock-johnny-joint-rod-end-2-1-2in-forged-2-625in-x-640in-ball-1-1-4in-12-rh-thread-shank","title":"RockJock Johnny Joint Rod End 2 1\/2in Forged 2.625in X .640in Ball 1 1\/4in-12 RH Thread Shank","description":"RockJocks forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1\/2 in. diameter, fitted with a zerk fitting for greasing, 2 1\/4 in. of 1 1\/4 in.-12 right hand threads on the shank, and a 2.625 in. mounting width ball with a .640 in. thru bolt hole. Finished in gold zinc plating.","brand":"RockJock","offers":[{"title":"Default Title","offer_id":52076451234103,"sku":"ROKCE-9114-28","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/0102\/8407\/files\/0b57d487e29ca8d63d8ce3dbd0067159.jpg?v=1777717412"}],"url":"https:\/\/offroadoverlandunlimited.com\/collections\/rockjock.oembed?page=3","provider":"Offroad \u0026 Overland Unlimited","version":"1.0","type":"link"}